Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

When a dialog box appears asking if you want to install the client adapter using the default application 
installation directory, click Yes. The default directory is \Windows\Programs\Cisco on HPC devices or 
\Windows\Start Menu\Programs\Cisco on PPC devices.

If you click No on an HPC device, CeAppMgr transfers the *.cab file to the Windows CE 
device and executes it. This process takes awhile and shows no evidence of activity. 
Eventually a screen appears on the Windows CE device that asks you where the application 
files should be installed.

A message and a progress bar appear indicating that the client adapter is being installed. CeAppMgr 
copies the processor-specific *.cab file to the Windows CE device. Then the driver and help files are 
copied to the \Windows directory, and the client utilities are installed in the \Windows\Programs\Cisco 
directory on HPC devices or the \Windows\Start Menu\Programs\Cisco directory on PPC devices. 
Shortcuts to ACU and CEM are automatically added to the desktop on HPC devices.

When the installation process is complete on the laptop or PC, a message appears asking you to check 
the screen of the Windows CE device to see if any additional steps are required to complete the 
installation. Click OK to terminate the installation process on the laptop or PC.

Complete any required steps on the Windows CE device.

Disconnect the Windows CE device.

Insert the client adapter (with the Cisco logo facing up) into the PC card slot of the Windows CE device.

The Windows CE device should configure the client adapter, and the green LED on the adapter should 
blink. If this does not happen, remove the client adapter, reset the Windows CE device, and reinsert the 
client adapter.

The Cisco Wireless LAN Adapter Settings dialog box appears. (If the dialog box does not appear, select 
Start, Settings, Control Panel, Network, the Adapters tab, the Cisco Aironet wireless LAN adapter, 
and Properties on HPC devices or Start, Settings, the Connections tab, Network, and the Cisco 
Aironet wireless LAN adapter on PPC devices.)

Perform one of the following:

If your device is connected to a DHCP server, select Obtain an IP address via DHCP or Use 
server-assigned IP address and click OK.

If your device is not connected to a DHCP server, select Specify an IP address or Use specific IP 
address and follow the steps below:

Enter the IP address, subnet mask, and default gateway address you want to assign to your 
device. They can be obtained from your system administrator.

Select the Name Servers tab and enter the primary and secondary DNS and WINS you want to 
assign to your device. They can be obtained from your system administrator.

Click OK.

Double-click the Cisco ACU icon or select Start > Programs > Cisco > Aironet Client Utility to open 
ACU.

Select SSID under Property. Enter your RF network’s case-sensitive SSID in the Value box.

Select Client Name under Property. Enter your Windows CE device’s unique client name in the Value 
box.