Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

The following information from your system administrator:

The logical name for your Windows CE device (also referred to as client name)

The case-sensitive service set identifier (SSID) for your RF network

The primary and secondary Domain Name System (DNS) and Windows Internet Name Service 
(WINS) to be assigned to your Windows CE device

If your network setup does not include a DHCP server, the IP address, subnet mask, and default 
gateway address to be assigned to your device

The wired equivalent privacy (WEP) keys of the access points with which your client adapter 
will communicate, if your wireless network uses static WEP for security

Your username and password for LEAP, EAP-FAST, or PEAP authentication, if your wireless 
network uses one of these authentication types

Your username for EAP-TLS authentication, if your wireless network uses EAP-TLS 
authentication

Protected access credentials (PAC) file if your wireless network uses EAP-FAST authentication 
with manual PAC provisioning

Access points to which your client adapter may attempt to authenticate must use the following 
firmware versions or later: 12.00T (340, 350, and 1200 series access points) or Cisco IOS Release 
12.2(4)JA (1100 series access points).

All necessary infrastructure devices such as access points, servers, gateways, and user databases 
must be properly configured for the authentication type you plan to enable on the client.

Client adapter firmware version 5.60.17 is recommended for use with client utility and driver release 
2.70 for Windows CE. If your client adapter is using a previous firmware version, follow the instructions 
in the Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for 
Windows CE (part number OL-1375-05) to upgrade the firmware after installing client utility and driver 
release 2.70.

Microsoft PEAP may not function properly on PPC 2002 devices.