Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

When you are finished making selections, click Next.

The installation process begins, and you are notified as each component is installed. Perform one of the 
following:

If a message appears asking if you wish to reboot now, click Yes.

To ensure that your client adapter software is installed properly, Cisco recommends that you 
click Yes to reboot your computer now.

If a message appears indicating that the system is about to reboot, click OK and allow your computer 
to restart.

If the following message appears, click OK and then reboot your computer: “The installation will 
complete and applications will be installed when a wireless LAN client adapter is inserted. If an 
adapter is already inserted, remove and reinsert the adapter or reboot the machine.”

The Found New Hardware screen appears. Depending on your computer’s operating system, you 
may have to click Next. The driver and other software components are installed. Then an ACM icon 
appears in the Windows system tray (unless you changed the default value during installation). 
Perform one of the following:

If a message appears asking if you wish to reboot now, click Yes.

To ensure that your client adapter software is installed properly, Cisco recommends that 
you click Yes to reboot your computer now.

If a message appears indicating that the system is about to reboot, click OK and allow your 
computer to restart.

Allow 
Auto-Provisioning?

Enables a protected access credentials (PAC) file to be obtained 
automatically as needed (for instance, when a PAC expires, when the 
client adapter accesses a different server, when the EAP-FAST 
username cannot be matched to a previously provisioned PAC, etc.).

Options: Yes or No

Default: Yes

This parameter is applicable only to client adapters that are 
installed in computers running Windows 2000 or XP.