Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

This section describes changes and additions to the documents listed in the “Related Documentation” 
section.

Whenever you disable LEAP, the client adapter is automatically reinitialized, causing the firmware to 
load any saved WEP keys from Flash memory into RAM. This feature ensures the client adapter uses a 
WEP key that was set in the WEP Keys screen of the Macintosh client utility, instead of one assigned 
during LEAP authentication, when LEAP is disabled.

In addition, the Restart Card option has been added to the File pull-down menu of the Macintosh client 
utility. With this option, you can reinitialize the client adapter at any time.

The location manager feature of the Macintosh operating system allows you to save a set of preferences 
(or a location) for a specified application. This feature has been modified to allow configuration settings 
for the client adapter to be saved so that you can easily switch between configurations for different 
locations (such as the office and home) without having to reset individual configuration parameters. This 
feature, called the location manager module, is installed with the client utility.

Follow the instructions below to set up a location using this feature on Mac OS 9.x.

Select the apple icon in the menu bar.

Select Control Panels > Location Manager.

Select File in the menu bar.

Select New Location and enter a name for the location in the Name New Location field. Click Save.

In the Location Manager window, select Cisco Wireless LAN in the Settings menu and click Apply.

Select File in the menu bar and Save Location to save the current settings of the client adapter.

To switch locations, you can use the control strip in the bottom right-hand corner of the display or follow 
the steps below:

Select the apple icon in the menu bar.

Select Control Panels > Location Manager.

In the Location Manager window, select the location to which you want to switch in the Current 
Location menu. A message appears indicating that switching locations was successful. Click OK.