Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter
8
Release Notes for Cisco Aironet 340, 350, and CB20A Client Adapter Install Wizard 1.2 for Windows
OL-4532-01
New and Changed Information
Only 350 series and CB20A cards that are installed on computers running Windows 2000 or XP and
running LEAP or host-based EAP authentication can be used with WPA. Support for WPA is available
in the software components included in Install Wizard version 1.2 or greater. However, if you want to
use host-based EAP authentication with WPA, you must install additional software with WPA support.
The following WPA software is recommended for use with Cisco Aironet client adapters:
running LEAP or host-based EAP authentication can be used with WPA. Support for WPA is available
in the software components included in Install Wizard version 1.2 or greater. However, if you want to
use host-based EAP authentication with WPA, you must install additional software with WPA support.
The following WPA software is recommended for use with Cisco Aironet client adapters:
•
Funk Odyssey Client supplicant version 2.2 (for Windows 2000)
•
Windows XP Service Pack 1 and Microsoft support patch 815485 (for Windows XP)
Note
Meetinghouse AEGIS Client supplicant version 2.1 is also supported for use with Windows 2000
and XP; however, it was not tested with this client adapter software release.
and XP; however, it was not tested with this client adapter software release.
Note
Refer to Chapter 5 of the 340, 350, and CB20A Wireless LAN Client Adapters Installation and
Configuration Guide for Windows (version OL-1394-07) for instructions on enabling WPA.
Configuration Guide for Windows (version OL-1394-07) for instructions on enabling WPA.
Note
WPA must also be enabled on the access point. Access points must use Cisco IOS Release 12.2(11)JA
or greater to enable WPA. Refer to the documentation for your access point for instructions on enabling
this feature.
or greater to enable WPA. Refer to the documentation for your access point for instructions on enabling
this feature.
Table 1
illustrates CKIP, WPA TKIP, and CCKM support in the client adapter Install Wizard releases to
date.
Table 1
CKIP, WPA TKIP, and CCKM Support in Install Wizard Releases
Clients Supported
LEAP/Host-Based
EAP and
CKIP/WPA TKIP/
CCKM
Install Wizard
Version
Third-Party
Supplicant
Required
Operating System
Supported
340, 350, CB20A
LEAP with CKIP
1.0 or later
No
Windows 95, 98, NT,
2000, Me, XP
340, 350, CB20A
LEAP with CCKM
and CKIP
1.1 or later
No
Windows 98, NT, 2000,
Me, XP
350, CB20A
LEAP with CCKM
and WPA TKIP
1.2 or later
No
Windows 2000 and XP
350, CB20A
LEAP with WPA
(no CCKM)
1.2 or later
No
Windows 2000 and XP
350, CB20A
PEAP with WPA
(no CCKM)
1.2 or later
No
1
Windows XP
350, CB20A
PEAP with WPA
(no CCKM)
1.2 or later
Yes
Windows 2000
350, CB20A
EAP-TLS with WPA
(no CCKM)
1.2 or later
No
1
Windows XP
350, CB20A
EAP-TLS with WPA
(no CCKM)
1.2 or later
Yes
Windows 2000