Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

Release Notes for Cisco Aironet Client Utilities 2.50 and Driver 2.50 for Windows CE

OL-5517-01

System Requirements

You need the following in order to install client utility and driver release 2.50 for Windows CE:

•

One of the following Windows CE devices equipped with a Type II or Type III PC card slot:

–

HPC 2000 device running Windows CE 3.0 with an ARM, StrongARM, MIPS, SH4, or X86
platform

–

PPC 2000 device running Windows CE 3.0 with an ARM, StrongARM, MIPS, or SH3 platform

–

PPC 2002 device running Windows CE 3.0 with a StrongARM platform

–

PPC 2003 device running Windows CE .NET 4.2 with a StrongARM platform

–

Windows CE .NET device running Windows CE .NET 4.0, 4.1, or 4.2 with a StrongARM,
ARMv4, ARMv4T, or X86 platform

•

Cisco Aironet 350 Series Wireless LAN Client Adapter (PC card or LM card)

Note

Client adapter driver and utility version 2.50 is not supported for use with Cisco Aironet 340
series client adapters.

•

Client adapter firmware version 5.40.10 or later (recommended)

•

Laptop or PC running a Windows operating system and Microsoft ActiveSync

•

ActiveSync connection (which can be serial, USB, etc.) to the Windows CE device

•

A PPC 2002, PPC 2003, or Windows CE .NET 4.2 device, if your wireless network uses EAP-FAST,
EAP-TLS, or PEAP authentication

•

Certificate Authority (CA) and user certificates for EAP-TLS authentication or CA certificate for
PEAP authentication

•

If your wireless network uses PEAP authentication with a One-Time Password (OTP) user database:

–

The hardware token from an OTP vendor

–

Your hardware token password

•

The following information from your system administrator:

–

The logical name for your Windows CE device (also referred to as client name)

–

The case-sensitive service set identifier (SSID) for your RF network

–

The primary and secondary Domain Name System (DNS) and Windows Internet Name Service
(WINS) to be assigned to your Windows CE device

–

If your network setup does not include a DHCP server, the IP address, subnet mask, and default
gateway address to be assigned to your device

–

The wired equivalent privacy (WEP) keys of the access points with which your client adapter
will communicate, if your wireless network uses static WEP for security

–

Your username and password for LEAP, EAP-FAST, or PEAP authentication, if your wireless
network uses one of these authentication types

–

Your username for EAP-TLS authentication, if your wireless network uses EAP-TLS
authentication

–

Protected access credentials (PAC) file if your wireless network uses EAP-FAST authentication
with manual PAC provisioning