Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter
20
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 1.1
OL-5800-01
Caveats
•
CSCed21099—PEAP does not operate with domain login
PEAP authentication does not operate with domain login. To work around this problem, create a
profile in ADU that uses PEAP authentication but do not enter a domain name in the Specific Server
or Domain field on the Advanced Configuration window. If the Login Name field is not filled in
automatically, enter your username with nothing after it (for example, jsmith).
profile in ADU that uses PEAP authentication but do not enter a domain name in the Specific Server
or Domain field on the Advanced Configuration window. If the Login Name field is not filled in
automatically, enter your username with nothing after it (for example, jsmith).
When you activate this profile, Cisco Secure ACS searches for the login name across all domain
databases and attempts to authenticate the user against the first database that matches the username.
While not specifying a domain name may increase the time it takes for your client adapter to
authenticate, it helps to ensure that the authentication attempt is successful. This workaround applies
to both Windows 2000 and XP.
databases and attempts to authenticate the user against the first database that matches the username.
While not specifying a domain name may increase the time it takes for your client adapter to
authenticate, it helps to ensure that the authentication attempt is successful. This workaround applies
to both Windows 2000 and XP.
•
CSCee23962—EAP-TLS does not operate with domain login
EAP-TLS authentication does not operate with domain login. To work around this problem, create
a profile in ADU that uses EAP-TLS authentication but do not enter a domain name in the
Server/Domain Name field on the Define Certificate window. If the Login Name field is not filled
in automatically, enter your username in this format: username@domain (for example,
jsmith@acs-test.cisco.com). This workaround applies to both Windows 2000 and XP.
a profile in ADU that uses EAP-TLS authentication but do not enter a domain name in the
Server/Domain Name field on the Define Certificate window. If the Login Name field is not filled
in automatically, enter your username in this format: username@domain (for example,
jsmith@acs-test.cisco.com). This workaround applies to both Windows 2000 and XP.
•
CSCed40520—Up to 5-minute delay for initial boot
Some computers may experience up to a 5-minute delay during the first boot after installation.
Subsequent boots are normal.
Subsequent boots are normal.
•
CSCec08294—Client remains in access point’s association table
The client remains in the access point’s association table for approximately 30 minutes after it has
been disabled.
been disabled.
•
CSCed23644—DHCP does not operate if MIC is enabled on VxWorks access points
DHCP does not operate with CB21AG and PI21AG client adapters if MIC is enabled on VxWorks
access points. To work around this problem, upgrade the VxWorks access points to firmware version
12.04 or later.
access points. To work around this problem, upgrade the VxWorks access points to firmware version
12.04 or later.
Open ADU Caveats
The following caveats are not resolved in ADU 1.1.
•
CSCee85197—Cannot create driver diskettes when adapter not inserted
If you try to use the Install Wizard to create driver installation diskettes when a client adapter is not
inserted in your computer, the following message appears and the operation terminates: “Cisco
Aironet 802.11a/b/g wireless adapter software update can't proceed. Please insert the adapter in the
system and try again.”
inserted in your computer, the following message appears and the operation terminates: “Cisco
Aironet 802.11a/b/g wireless adapter software update can't proceed. Please insert the adapter in the
system and try again.”
•
CSCed72076—Channels 13 and 14 not available in ad hoc mode for Japanese cards
The Japan regulatory domain supports channels 1 through 14 for IEEE 802.11b communications and
channels 1 through 13 for IEEE 802.11g communications. However, channels 13 and 14 do not
appear in the Channels drop-down list on the ADU Profile Management (Advanced) window for
client adapters that are configured for use in Japan.
channels 1 through 13 for IEEE 802.11g communications. However, channels 13 and 14 do not
appear in the Channels drop-down list on the ADU Profile Management (Advanced) window for
client adapters that are configured for use in Japan.
•
CSCin58718—ADU shows invalid IP address for VxWorks access points
The ADU Advanced Status window shows an Associated AP IP Address of 0.0.0.0 when the client
adapter is associated to a VxWorks access point. To work around this problem, upgrade the VxWorks
access point to firmware version 12.04 or later.
adapter is associated to a VxWorks access point. To work around this problem, upgrade the VxWorks
access point to firmware version 12.04 or later.