Примечания к выпуску для Cisco Cisco WAP121 Wireless-N Access Point with Single Point Setup
Release Notes for the Cisco WAP121 and WAP321 Wireless Access Points
11
Release Notes
•
CSCtw70914
•
CSCtw62382
•
CSCtw47624
•
CSCts99306
Open Caveats
Table 5
Open Caveats in Firmware Version 1.0.1.10
Ref Number
Description
CSCub46649
Symptom:
While operating WDS Bridging using a 2.4 GHz band with a 20/40 MHz channel
bandwidth, the WDS links may disconnect. The radio can change from 40 MHz to 20 MHz if any 20
MHz devices are detected in the area, resulting in a mismatch of channel bandwidths throughout the
WDS devices.
MHz devices are detected in the area, resulting in a mismatch of channel bandwidths throughout the
WDS devices.
Workaround:
Configure WDS links using the 20 MHz channel bandwidth.
CSCub46043
Symptom:
When untagged packets are received on a VAP interface (SSID), they may be treated as
tagged packets.
CSCub45975
Symptom:
In a radio saturated environment, Work Group Bridge mode can take from three to seven
minutes to establish connectivity with the remote upstream access point.
CSCtx68659
Symptom:
Bonjour does not operate at the very first bootup of the WAP321 device. Even though
the Bonjour feature shows enabled on the web-based configuration utility, Bonjour- enabled browsers
or Cisco FindIT cannot access the WAP321 device.
or Cisco FindIT cannot access the WAP321 device.
Workaround:
Manually reset the WAP321 by pressing the Reset button on the device. Once the
device is rebooted, the Bonjour name can be accessed by Bonjour- enabled browsers or Cisco
FindIT.
FindIT.
CSCtx04467
Symptom:
When DHCP connectivity is changed to a static IP address, the browser does not
automatically redirect the web-based configuration utility to the new IP address.
Workaround:
Type in the new static IP address into the URL field and login again.