Примечания к выпуску для Cisco Cisco WAP321 Wireless-N Access Point with Single Point Setup
16
Release Notes
Open Caveats
Table 7 Open Caveats in Firmware Version 1.0.0.3
Ref Number
Description
CSCtx60443
Symptom:
Captive Portal fails to authenticate WLAN clients if the Captive Portal-
enabled VAP interfaces and the AP management VLAN are assigned different IP subnets
while Inter-VLAN Routing is disabled.
while Inter-VLAN Routing is disabled.
Workaround:
Dedicate a single WAP321 for Captive Portal hotspot service with a
different VLAN subnet network.
Workaround:
Another workaround is to enable Inter-VLAN Routing and apply
advanced access control lists (ACLs) on the connected router, and purposely
segregate the AP management VLAN from other VLANs assigned on Captive Portal-
enabled VAP interfaces.
segregate the AP management VLAN from other VLANs assigned on Captive Portal-
enabled VAP interfaces.
CSCtx68659
Symptom:
Bonjour does not operate at the very first bootup of the WAP321 device.
Even though the Bonjour feature shows enabled on the configuration utility, Bonjour-
enabled browsers or Cisco FindIT cannot access the WAP321 device.
enabled browsers or Cisco FindIT cannot access the WAP321 device.
Workaround:
Manually reset the WAP321 by pressing the Reset button on the
device. Once the device is rebooted, the Bonjour name can be accessed by Bonjour-
enabled browsers or Cisco FindIT.
enabled browsers or Cisco FindIT.
CSCtx08343
Symptom:
The DHCP process fails to retrieve a new IP address if the WAP device is in
operation and the LAN cable is moved from one LAN to another.
Workaround:
Reconnect the LAN cable back to old network and click Restart from
the web-based configuration utility. Move the LAN cable immediately to the new LAN
network after clicking Restart.
network after clicking Restart.
CSCtx04467
Symptom:
When DHCP connectivity is changed to a static IP address, the browser will
not automatically redirect the web-based configuration utility to the new IP address.
Workaround:
Type in the new static IP address into the URL field to login again.
CSCtx04211
Symptom:
In Wireless Settings > Networks > Configuring VAPs if you click HTTP
Redirect, but then unclick it, you are still required to enter Redirect URL data before
saving.
saving.
Workaround:
Enter a HTTP/HTTPS URL link and click Save. Then click on any sub-
menu tree item from the left of the web-based configuration utility to exit without
saving.
saving.