Руководство По Обслуживанию для Cisco Cisco WAP561 Wireless-N Dual Radio Selectable Band Access Point
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Single Point Setup
Access Points
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
160
10
STEP 1
Go to the web-based configuration utility on the standalone access point.
STEP 2
Select Single Point Setup > Access Points in the navigation pane.
STEP 3
Set the Cluster name to the same name that is configured for the cluster members.
STEP 4
(Optional) In the Location field, enter a description of where the access point is physically
located, for example, Reception.
located, for example, Reception.
STEP 5
(Optional) In the Priority field, enter a value between 0 to 255.
STEP 6
Click Enable Single Point Setup.
The access point automatically joins the Single Point Setup.
Removing an Access Point from a Single Point Setup Cluster
Removing an Access Point from a Single Point Setup
To remove an access point from the Single Point Setup cluster:
STEP 1
In the table showing the detected devices, click the IP address for the clustered WAP device
you want to remove.
you want to remove.
The web-based configuration utility for that WAP device shows.
STEP 2
Select Single Point Setup > Access Points in the navigation pane.
STEP 3
Click Disable Single Point Setup.
The Single Point Setup status field for that access point will now show Disabled.