Руководство По Обслуживанию для Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point
Getting Started
Using the Access Point Setup Wizard
Cisco WAP571/E Administration Guide
11
1
If you already have a cluster on your network, you can add this device to it by
clicking Join an Existing Cluster, and then entering the Existing Cluster Name.
clicking Join an Existing Cluster, and then entering the Existing Cluster Name.
If you do not want this device to participate in a Single Point Setup at this time,
click Do not Enable Single Point Setup.
click Do not Enable Single Point Setup.
(Optional) You can enter text in the AP Location field to note the physical location
of the WAP device.
of the WAP device.
STEP 5
Click Next. The Configure Device - Set System Date and Time window appears.
STEP 6
Select your time zone, and then set the system time manually or set up the WAP
device to get its time from an NTP server. For a description of these options, see
device to get its time from an NTP server. For a description of these options, see
NOTE
There is an arrow next to System Time to set time from current computer if
you want to set the time and date of your computer.
STEP 7
Click Next. The Enable Security - Set Password window appears.
STEP 8
Enter a New Password and enter it again in the Confirm Password text box. For
more information about passwords, see
more information about passwords, see
NOTE
You can uncheck the Password Complexity box if you want to disable the
password security rules. However, we strongly recommend keeping the password
security rules enabled.
security rules enabled.
STEP 9
Click Next. The Enable Security - Name Your Wireless Network window appears
for the Radio 1 interface.
for the Radio 1 interface.
NOTE
For this window and the following two windows (Wireless Security and
VLAN ID), you configure these settings for the Radio 1 interface first. Then the
windows reappear to allow you to configure these settings for Radio 2.
windows reappear to allow you to configure these settings for Radio 2.
STEP 10
Enter a Network Name. This name serves as the SSID for the default wireless
network.
network.
STEP 11
Click Next. The Enable Security - Secure Your Wireless Network window appears.
STEP 12
Choose a security encryption type and enter a security key. For a description of
these options, see
these options, see
STEP 13
Click Next. The Wizard displays the Enable Security- Assign the VLAN ID For Your
Wireless Network window.
Wireless Network window.
STEP 14
Enter a VLAN ID for traffic received on the wireless network.