Руководство По Установке для Cisco Cisco ONS 15454 M12 Multiservice Transport Platform (MSTP)

Скачать
Страница из 14
Corporate Headquarters:
© 2005-2007 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Installing the MXP_2.5G_10E_C and 
MXP_2.5G_10E_L Cards in the Cisco ONS 15454 
SONET/SDH
Note
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms 
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. 
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's 
path protection feature, which may be used in any topological network configuration. Cisco does not 
recommend using its path protection feature in any particular topological network configuration.
Product Names: 15454-4x2.5G10EC MXP, 15454-4x2.5G10ELMXP
This document provides a card description, specifications, and installation procedure for the 
MXP_2.5G_10E_C and MXP_2.5G_10E_L cards. These cards are compatible with the ONS 15454 
SONET (ANSI) and the ONS 15454 SDH (ETSI) shelf assemblies. As appropriate, use this document 
in conjunction with the Cisco ONS 15454 DWDM Procedure Guide, the Cisco ONS 15454 DWDM 
Reference Manual, 
and the Cisco ONS 15454 DWDM Troubleshooting Guide.
Note
“MXP_2.5G_10E_C” is the card name that appears in Cisco Transport Controller (CTC); the same card 
is named “4x2.5G 10E MXP C” on the physical faceplate. “MXP_2.5G_10E_L” is the name that appears 
in CTC; the same card is named “4x2.5G 10E MXP L” on the physical faceplate.
This document contains the following sections: