Руководство По Устранению Ошибки для Cisco Cisco ONS 15454 M2 Multiservice Transport Platform (MSTP)
MVR Features Explanation of the GE_XP/XPE
Cards
Cards
Document ID: 118598
Contributed by Mahender Verma, Cisco TAC Engineer.
Nov 20, 2014
Nov 20, 2014
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Multicast and Video Broadcast Application Based on MVR
Brief Explanation of Topology
Feature Configurations
MVR Detail Settings in Cisco Transport Controller
Operating Modes
Summary
Prerequisites
Requirements
Components Used
Background Information
Multicast and Video Broadcast Application Based on MVR
Brief Explanation of Topology
Feature Configurations
MVR Detail Settings in Cisco Transport Controller
Operating Modes
Summary
Introduction
This document describes the Multicast VLAN Registration (MVR) feature which is supported in Cisco
GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE cards.
GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE cards.
Prerequisites
Requirements
Cisco recommends that you have knowledge of Ethernet and GE_XP cards in Cisco ONS 15454
Multi−Service Transport Platform (MSTP) equipment.
Multi−Service Transport Platform (MSTP) equipment.
Components Used
The information in this document is based on this hardware:
Digital Subscriber Line Access Multiplexers (DSLAM)
•
Cisco ME3400 switch
•
ONS 15454 MSTP and Layer 3 Aggregation Services Router 9000 (ASR9000) Router and IP
television (IPTV) source
television (IPTV) source
•
GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE cards in "Layer 2 over Dense Wavelength Division
Multiplexing (DWDM)" mode
Multiplexing (DWDM)" mode
•
This document can also be used with these related hardware and software versions:
Cisco ONS 15454 MSTP
•
GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE
•