для Cisco Cisco Broadband Access Center for Cable 4.1

C-18

Cisco Broadband Access Center for Cable Administrator’s Guide

OL-2445-02

Appendix C Device Provisioning Engine Command Line Interface

System Commands

Examples

This is an example of how to use the show running-config command:

dpe# show running-config

dpe port 49186

dpe rdu-server server_x.cisco.com 49187

hostname dpe

interface ethernet 0 ip address 10.10.10.5 255.255.255.0

interface ethernet 0 ip enabled true

interface ethernet 0 provisioning enabled true

ip default-gateway 10.10.20.10

Note

The output presented in this example is trimmed.

show tftp files

Usage Guidelines

This command identifies the files that are currently stored in the DPE cache. The file size is also shown.

Examples

This is an example of how to use the show tftp files command:

dpe# show tftp files

The list of TFTP files currently in DPE cache

filename

size

bronze.cm

310

gold.cm

310

silver.cm

310

show version

Usage Guidelines

This command is used to identify the current version of DPE software running on the device.

Examples

This is an example of how to use the show version command:

dpe# show version

Version: BPR 2.5 (cbpr_25_L_200303240515)

tftp verify-ip

Usage Guidelines

This command enables the verification of requestor IP addresses on dynamic configuration TFTP
requests.