Примечания к выпуску для Cisco Cisco Prime Network 3.8
15
Cisco Prime Network 3.8.1 Release Notes
OL-26395-01
New Device Support Information
E-Line Activation on 7600 WS Line Cards (with Limitations)
Although the E-line point-to-point activations provided with Prime Network 3.8.1 are intended as
reference configuration examples only, and not as production-ready activations, you might choose to use
them in your network, at your own risk. If you do so, please be aware that these activations can be used
on 7600 device ES line cards and the following WS line cards: WS-X6708-10GE, WS-X6748-GE-TX,
WS-X6704-10GE,WS-X6724-SFP. Sub-interface configuration for the WS line cards uses the EFP ID
with the following limitations:
reference configuration examples only, and not as production-ready activations, you might choose to use
them in your network, at your own risk. If you do so, please be aware that these activations can be used
on 7600 device ES line cards and the following WS line cards: WS-X6708-10GE, WS-X6748-GE-TX,
WS-X6704-10GE,WS-X6724-SFP. Sub-interface configuration for the WS line cards uses the EFP ID
with the following limitations:
•
The Outer VLAN ID will be the dot1q encapsulation configured on the sub interface.
•
Inner VLAN ID is not supported.
•
VLAN preservation value must be "None" as VLAN manipulation is not supported on
sub-interfaces, and VLAN mapping will not be supported.
sub-interfaces, and VLAN mapping will not be supported.
•
VLAN hub and multiple EFPs are not supported on WS cards (only on ES cards).
•
Only ES cards are executed as part of E-LAN VPLS HUB and Multipoint EFPs for the 7600 device.
Note
All of the activations (templates, scripts, and workflows) provided with Cisco Prime Network Activation
are reference configuration examples to aid in customer implementation activities and to demonstrate
the capability of Prime Network Activation. They are not intended to be production-ready activations of
any Carrier Ethernet, IP RAN, or MPLS VPN configurations. The activations are expected to require
customer-specific implementation extensions. Implementation extensions and modifications to the
software product are not supported via Cisco Support Agreements. If you require assistance in extending
these activations, please contact Cisco Advanced Services.
are reference configuration examples to aid in customer implementation activities and to demonstrate
the capability of Prime Network Activation. They are not intended to be production-ready activations of
any Carrier Ethernet, IP RAN, or MPLS VPN configurations. The activations are expected to require
customer-specific implementation extensions. Implementation extensions and modifications to the
software product are not supported via Cisco Support Agreements. If you require assistance in extending
these activations, please contact Cisco Advanced Services.
New Device Support Information
Prime Network download site
on Cisco.com.
For detailed information about new device support in Prime Network 3.8.1, please see
In addition, please note the following:
•
Prime Network Change and Configuration supports the following network elements in this release:
–
Cisco ASR 901 network elements.
–
Cisco ASR 903 network elements.
–
Cisco ASR 5000 network elements.
Open Bugs in Prime Network 3.8.1
The following sections identify bugs that are open in Prime Network 3.8.1, according to the following
criteria:
criteria:
•
All catastrophic and severe bugs (if any).
•
Moderate, minor and enhancement bugs that are considered likely to affect the customer’s
experience with Prime Network.
experience with Prime Network.