Руководство По Установке для Cisco Cisco Prime Assurance Manager 1.1
11
Step 9
After you verify the options, click Finish to start the deployment.
This may take a few minutes to complete. Check the progress bar in the Deploying Virtual Application window to
monitor the task status.
monitor the task status.
After the deployment task has successfully completed, a confirmation window appears.
Step 10
Click Close.
The virtual appliance that you deployed is listed under the host, in the left pane of the vSphere client.
Installing the Server
After you deploy the Cisco Prime Assurance Manager OVA, you must configure the virtual application in order to install and
start Cisco Prime AM.
start Cisco Prime AM.
Step 1
In the VMware vSphere client, right-click the deployed virtual appliance and choose Power > Power On.
Step 2
Click the Console tab. At the localhost login prompt, enter setup.
Step 3
The console prompts you for the following parameters:
•
IP Address—The IP address of the virtual appliance.
•
IP default netmask—The default subnet mask for the IP address.
•
IP default gateway—The IP address of the default gateway.
•
Default DNS domain—The default Domain Name.
•
Primary nameserver—The primary name server. You may add or edit this nameserver. To configure multiple name
servers or NTP servers, enter y.
servers or NTP servers, enter y.
•
Primary NTP server. The default is time.nist.gov.
•
Username—The name of the first administrative user. You can accept the default, which is admin.
•
Password—Enter your password and confirm it. The default is admin. We recommend that you note down the
password you enter, as the password cannot be retrieved or reset.
password you enter, as the password cannot be retrieved or reset.
Step 4
When you are done entering these values, the vSphere Client tests the network configuration parameters you entered.
If the tests are successful, it begins installing Cisco Prime Assurance Manager. When the installation is complete, the
virtual appliance reboots and the system is initialized. When initialization is complete, the system displays a login
prompt (please be patient; there will be little or no console activity during initialization).
If the tests are successful, it begins installing Cisco Prime Assurance Manager. When the installation is complete, the
virtual appliance reboots and the system is initialized. When initialization is complete, the system displays a login
prompt (please be patient; there will be little or no console activity during initialization).
Step 5
Log in to the virtual appliance using the administrative username and password you specified.