Руководство Разработчика для Cisco Cisco Prime Optical 9.8
Cisco Prime Optical 9.8 GateWay/CORBA Programmer Reference Guide
OL-29218-01
583
4.9.1.5 getTP
Synopsis
Description
This interface returns the TP structure for the given TP name (CTP, FTP, or PTP). The TP
structure consists of transmission parameters. The transmission parameters returned are the
parameters in place on the actual TP on the NE. If there are no transmission parameters or the
TP does not actually exist on the NE, transmissionParams will be empty.
structure consists of transmission parameters. The transmission parameters returned are the
parameters in place on the actual TP on the NE. If there are no transmission parameters or the
TP does not actually exist on the NE, transmissionParams will be empty.
Parameters
• NamingAttributes tpName—TP name. The structure of this TP is retrieved.
• TerminationPoint_T tp—The retrieved TP.
• TerminationPoint_T tp—The retrieved TP.
Throws
For CPTPs, use this interface to determine the parameters that characterize a CPTP.
Example
The following table describes the ConnectionlessPort and PortTPRoleState parameters.
TP Parameter
Name
Name
TP Type
Layers
Valid Values
AVC
Description
ConnectionlessPort
• PTP
• FTP
All layers
• true
• false
• false
Yes
See
PortTPRoleState
• PTP
• FTP
• FTP
All
connectionless
layers
connectionless
layers
• unassigned
• assigned
• fdInternal
• fdEdge
• mismatch
• assigned
• fdInternal
• fdEdge
• mismatch
Yes
See
The mismatch operational state
exists for the CPTP if there is a
mismatch in the port type. This is
applicable only on pluggable
PPM ports when you change a
previously defined CPTP with a
exists for the CPTP if there is a
mismatch in the port type. This is
applicable only on pluggable
PPM ports when you change a
previously defined CPTP with a