Руководство Разработчика для Cisco Cisco Prime Optical 10.3
Cisco Prime Optical 10.3 GateWay/CORBA Programmer Reference Guide
24
Out of Service–Autonomous
and Management
(OOS_AUMA)
and Management
(OOS_AUMA)
The entity is not operational due to an autonomous event and has been
administratively removed from service.
administratively removed from service.
Table 2-3: Equipment Service State–Secondary (ONS 15310 CL)
Secondary States (SST)
Attribute Value
Meaning
Unassigned (UAS)
The entity is not provisioned in the database.
Unequipped (UEQ)
The entity has been removed, leaving an empty slot. It may or may not
be assigned (provisioned).
be assigned (provisioned).
Mismatch of Equipment and
Attributes (MEA)
Attributes (MEA)
Incorrect equipment is installed. For example,
the card plugged in is not compatible with the
provisioned card or slot.
the card plugged in is not compatible with the
provisioned card or slot.
Automatic In-Service (AINS)
The entity is in a delay transition (to IS) state. The transition to IS is
pending the correction of off-normal conditions on the entity.
pending the correction of off-normal conditions on the entity.
Maintenance (MT)
The entity has been manually removed from
service for maintenance. It is still capable of
performing its provisioned functions. Traffic is
still carried.
service for maintenance. It is still capable of
performing its provisioned functions. Traffic is
still carried.
Disabled (DSBLD)
The entity has been manually removed from
service and cannot perform its provisioned
functions. All of its provisioned services are
disrupted. Traffic is not carried.
service and cannot perform its provisioned
functions. All of its provisioned services are
disrupted. Traffic is not carried.
Loopback (LPBK)
The loopback command is in effect (any loopback
type).
type).
2.1.3.3 Topological Links
All topological links are unidirectional or bidirectional for ONS 15310 CL NEs.
2.1.3.4 CTX Cards
The CTX card is an electrical card that consists of 21 digital signal level 1 (DS1) ports and three
DS3/EC1 ports. Two optical interfaces are supported using SFP technology. OC-3/STM-1 and
OC-12/STM-4 ports are available.
DS3/EC1 ports. Two optical interfaces are supported using SFP technology. OC-3/STM-1 and
OC-12/STM-4 ports are available.
2.1.3.5 PTPs
All PTPs are bidirectional for the ONS 15310 CL. The ports are always in channelized mode.
PTPs support In Service and Out of Service–Maintenance values for the service state attribute.
PTPs support In Service and Out of Service–Maintenance values for the service state attribute.
2.1.3.6 CTPs
All CTPs are in channelized mode for the ONS 15310 CL.
2.1.3.7 SNCs
CTX cards perform synchronous transport signal (STS) and VT1.5 switching. The subnetwork
connection (SNC) name cannot exceed 48 characters. The NE enforces the SNC name character
limit.
connection (SNC) name cannot exceed 48 characters. The NE enforces the SNC name character
limit.