Руководство Разработчика для Cisco Cisco Prime Performance Manager 1.7
Cisco Prime Performance Manager 1.7 REST API Guide
5.7.1 FQDN
Table 7 – FQDN Parameter
Parameter
Notes
FQDN
The FQDN (Fully Qualified Domain Name) value as defined in the Prime
Performance Manager Server. It may contain the Node or Group, or the
corresponding “Var Name (key)” found in the ProcessDBSummary section of
the report definition XML file along followed by a specific value. A tenant
report is specified by prepending the FQDN with a Tenant value.
Format:
Node=[host or IP],[other keys as defined in the corresponding report XML
file]
Node=[host or IP],Group=[group name],[other keys as defined in the
corresponding report XML file]
Group=[group name]
[Var name as defined in the corresponding report XML file]=[value].
Examples of valid formatted FQDN for some reports:
FQDN=Node=em1941kbf.cisco.com
FQDN=Tenant=MyTenant,Node=10.74.125.210
FQDN=Node=em1941kbf.cisco.com,ifDescr=FastEthernet0/
0
FQDN=Node=10.74.125.210,CPUSlot=0,CPUNum=0,processor
Index=1
FQDN=Node=NAM-ppm-nam01,Group=MY_GROUP
FQDN=Group=CableModem
FQDN=IPSLAOwner=Rubens
FQDN=DatastoreName=Local+Datastore+sjo-smf-esxi-8
Refer to your Prime Performance Manager server or network to determine
your own FQDN values.
Performance Manager Server. It may contain the Node or Group, or the
corresponding “Var Name (key)” found in the ProcessDBSummary section of
the report definition XML file along followed by a specific value. A tenant
report is specified by prepending the FQDN with a Tenant value.
Format:
Node=[host or IP],[other keys as defined in the corresponding report XML
file]
Node=[host or IP],Group=[group name],[other keys as defined in the
corresponding report XML file]
Group=[group name]
[Var name as defined in the corresponding report XML file]=[value].
Examples of valid formatted FQDN for some reports:
FQDN=Node=em1941kbf.cisco.com
FQDN=Tenant=MyTenant,Node=10.74.125.210
FQDN=Node=em1941kbf.cisco.com,ifDescr=FastEthernet0/
0
FQDN=Node=10.74.125.210,CPUSlot=0,CPUNum=0,processor
Index=1
FQDN=Node=NAM-ppm-nam01,Group=MY_GROUP
FQDN=Group=CableModem
FQDN=IPSLAOwner=Rubens
FQDN=DatastoreName=Local+Datastore+sjo-smf-esxi-8
Refer to your Prime Performance Manager server or network to determine
your own FQDN values.
Additional Notes
Only supported for “GET /{reportType}/{category}../{reportName}” requests.
If an FQDN or sgmid is not provided, the REST API defaults to a top network level report. A network level
report consists of information for the top samples in that report metric.
report consists of information for the top samples in that report metric.
Refer to the Prime Performance Manager documentation for more information about network level reports.
Not supported by views.
5.7.2 sgmid
Table 8 – sgmid Parameter
Parameter
Notes
sgmid
A positive integer number that uniquely identifies a node in the Prime
Performance Manager server
Format:
Positive integer number greater than 0 (e.g. 1002, 13001, ..).
-1 is also accepted, and it is optional. See note (3) below.
Examples of valid formatted sgmid:
Performance Manager server
Format:
Positive integer number greater than 0 (e.g. 1002, 13001, ..).
-1 is also accepted, and it is optional. See note (3) below.
Examples of valid formatted sgmid: