Руководство Пользователя для Cisco Multi-Stream CableCARD Module
Configure the DNCS for CableCARD and M-Card Support
4014667 Rev C
15
This section describes how to display the Set CableCARD MMI Copy Protection
screen so that you can view its settings and determine if they meet the needs of your
system. The following illustration is an example of the CableCARD MMI Copy
Protection screen.
Note: Refer to the DNCS Online Help for a detailed description of the fields in the Set
Note: Refer to the DNCS Online Help for a detailed description of the fields in the Set
CableCARD MMI Copy Protection screen.
Complete the following steps to display the Set CableCARD MMI Copy Protection
screen.
Important! This procedure also configures the DNCS for autobinding. To disable
Important! This procedure also configures the DNCS for autobinding. To disable
autobinding go to Disabling Autobinding (on page 16).
1 Is the CableCARD Data Summary screen open?
1 Is the CableCARD Data Summary screen open?
If yes, go to step 5.
If no, go to step 2.
2 On the DNCS Administrative Console, click the DNCS tab.
3 Click the Home Element Provisioning tab.
4 Click CableCARD. The CableCARD Data Summary screen opens.
5 Click MMI Screen Format. The Set CableCARD MMI Copy Protection screen
3 Click the Home Element Provisioning tab.
4 Click CableCARD. The CableCARD Data Summary screen opens.
5 Click MMI Screen Format. The Set CableCARD MMI Copy Protection screen
opens.
6 Refer to the DNCS Online Help for additional details on configuring the Set
CableCARD MMI Copy Protection screen.