Руководство По Установке для Cisco Model 6940 6942 6944 Optoelectronic Node Accessories
Cisco Prisma Model 6940/6944
Optoelectronic Node Dual AC
Jumper Installation Instructions
Optoelectronic Node Dual AC
Jumper Installation Instructions
Overview
The Cisco
®
Prisma
®
Model 6940/6944 dual AC jumper completes the circuit
between ports 5 and 6, allowing AC power to be fed into one of the ports and
tapped off the other port, while not interfering with the operation of the node. The
dual AC jumper is designed to plug into the power director location for ports 5
and 6. Refer to the illustration on the next page.
tapped off the other port, while not interfering with the operation of the node. The
dual AC jumper is designed to plug into the power director location for ports 5
and 6. Refer to the illustration on the next page.
Warning:
Avoid personal injury! Use of controls, adjustments, or procedures other
than those specified herein may result in hazardous radiation exposure.
than those specified herein may result in hazardous radiation exposure.
Avoid personal injury! The laser light source on this equipment emits
invisible laser radiation. Avoid direct exposure to the laser light source.
invisible laser radiation. Avoid direct exposure to the laser light source.
Purpose
This document describes the procedure for installing the dual AC jumper in a
Prisma Model 6940 or 6944 Optoelectronic Node.
Prisma Model 6940 or 6944 Optoelectronic Node.
Audience
These installation instructions are intended for technicians installing the Prisma
Model 6940/6944 Optoelectronic Node dual AC jumper.
Model 6940/6944 Optoelectronic Node dual AC jumper.
Document Version
This is the second formal release of this document. In addition to minor text and
graphic changes, the following table provides the technical changes to this
document.
graphic changes, the following table provides the technical changes to this
document.
Description
See Topic
Apply Cisco document format and
branding.
branding.
Affects entire document.