Руководство По Установке для Cisco 1GHz Surge-Gap Taps, Standard & Full Profile
Mounting the Faceplate
Mounting the Faceplate
After Removing the Faceplate, you are ready to install the faceplate in the
tap/passive housing.
To Install the Faceplate
Follow these steps to attach the faceplate to the housing.
1. If the housing is installed on a strand, go to step 2.
1. If the housing is installed on a strand, go to step 2.
If the housing is installed in a pedestal, go to step 3.
WARNING:
Protect yourself from electric shock and your equipment from damage.
Certain components can deliver an electrical shock.
2. Attach a grounding wire assembly to the strand wire and a drop port
F-connector.
Proceed to step 4.
3. Attach a grounding wire assembly to the strand clamp bolt on the pedestal and
a drop port F-connector.
Front View:
Front View:
OL-31976-01
23