Руководство Пользователя для Cisco Headend System Release 2.5
78-738186-01 Rev B
signonCount Utility
2-5
Set DNCS Tracing Levels
Introduction
Before you can begin using the signonCount utility, you need to set the tracing levels
of three DNCS processes to level 2. By setting the tracing levels for these processes to
level 2, you ensure that the DNCS captures the maximum level of detail for these
processes.
Note: The processes are hctmConfig, hctmMac, and hctmProvision.
Note: The processes are hctmConfig, hctmMac, and hctmProvision.
Setting the DNCS Tracing Levels
Follow these instructions to set the tracing levels of the hctmConfig, hctmMac, and
hctmProvision processes to level 2.
1.
From the DNCS Administrative Console, select the Utilities tab.
2.
Click Tracing.
Result: The DNCS Tracing Management window opens.
Result: The DNCS Tracing Management window opens.
3.
Scroll down until the hctmConfig, hctmMac, and hctmProvision processes
come into view.
4.
Are the tracing levels for all three of these processes already set to 2?
•
•
If yes, you have no need to complete the rest of this procedure; continue
with The signonCount Utility Interface, next in this chapter.
•
If no, go to step 5 to begin setting the tracing levels.
Note: The Trace column lists the current tracing level.
Example: In the example in step 2, the tracing levels are all set to 0.
Example: In the example in step 2, the tracing levels are all set to 0.