для Cisco Headend System Release 2.7
Chapter 3 Enabling CVT Downloads on the DNCS
50
4017541 Rev B
Review Record Layout Examples
Review the sample record layouts in this section. Note that the record tags (QAM,
HUB, and SESS) must always begin in the first column. Each field must be
separated by a pipe ( | ).
HUB, and SESS) must always begin in the first column. Each field must be
separated by a pipe ( | ).
QAM Record Layout
QAM|OUTPUT TSID|HEADEND ID
Example:
QAM|101|100
HUB Record Layout
HUB|HUB ID|HEADEND ID
Example:
HUB|1|100
SESS Record Layout
SESS|SESSMAC|SESSID|HEADEND ID
Example:
SESS|000000000002|199|100
Sample File
This sample file describes a simple system with two headends identified as 100 and
200.
200.
Sample
Features of This Sample System
QAM|101|100
QAM|203|200
Two QAMs—One with an output transport stream ID
of 101 in headend 100 and the other with an output
transport stream ID of 203 in headend 200
of 101 in headend 100 and the other with an output
transport stream ID of 203 in headend 200
HUB|1|100
HUB|6|200
Two hubs—Hub ID 1 is in headend 100 and Hub ID 6
is in headend 200
is in headend 200
SESS|000000000000|199|100
SESS|000000000001|299|200
Two sessions for the OSM—Session ID
00:00:00:00:00:00 199 is for headend 100 and session
ID 00:00:00:00:00:01 299 is for headend 200
00:00:00:00:00:00 199 is for headend 100 and session
ID 00:00:00:00:00:01 299 is for headend 200