Примечания к выпуску для Cisco Headend System Release 2.5
1-28
Why Choose System Release 3.5?
4001159 Rev B
More DNCS Enhancements: Improvements Make Familiar Tasks Easier,
Continued
Use MQAMs To Feed Multiple Hubs
A new user interface allows you to associate individual RF outputs in an MQAM
with specific hubs. To access this new interface, click the Hubs button under the Port
To Hubs column in the Basic Parameters tab for the Set Up MQAM window.
When you click Hubs, the RF
Output Port window opens.
To send data from this MQAM
To send data from this MQAM
modulator to only specific hubs in
the headend, select the hub name in
the Available Hubs field and then
click Add. The hub name moves
into the Selected Hubs field. Repeat
this step for each hub you want to
receive data from this MQAM
modulator.
If you want to send data from this
If you want to send data from this
MQAM modulator to all hubs in the
headend, make sure no hubs appear
in the Selected Hubs field. Any
QAM with no hubs selected is
considered to be feeding all hubs.
This allows you to add hubs
without having to modify the
configuration for QAMs.
Click Hubs to open the RF
Output Port window, where
you can associate output
ports with specific hubs.
Output Port window, where
you can associate output
ports with specific hubs.