Примечания к выпуску для Cisco Headend System Release 2.5
Restart the System Components
4000916 Rev C
55
Restarting the Cisco Application Server
Note: If the site you are upgrading uses the Pioneer Application Server, skip this
procedure and go to Restart the Application Server at Aptiv Sites (on page 56).
1 If necessary, open an xterm window on the Application Server.
2 Type appControl and then press Enter. The Applications Control window
procedure and go to Restart the Application Server at Aptiv Sites (on page 56).
1 If necessary, open an xterm window on the Application Server.
2 Type appControl and then press Enter. The Applications Control window
opens.
3 Select option 2 on the Applications Control window. The system displays a list of
Application Server processes and their current status.
4 Does the word running appear next to the current state field (Curr Stt) of each
process?
If yes, skip the rest of this procedure and go to Restart the Billing and Third-
Party Interfaces (on page 57).
Party Interfaces (on page 57).
If no, go to step 5.
5 Press the middle mouse button, and then select App Serv Start.
6 When the Application Control window indicates that the current state (Curr Stt)
6 When the Application Control window indicates that the current state (Curr Stt)
of each process is running, go to step 7.
Note: On some systems, the BFS Remote process may remain at Stopped; this is
normal.
Note: On some systems, the BFS Remote process may remain at Stopped; this is
normal.
7 Follow the on-screen instructions to close the Applications Control window.