Руководство По Установке для Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Chapter 4 Setup and Operation
130
OL-29643-02
4x2 Redundant Reverse Configuration Module
Signals from the left side of the amplifier (Ports 1 and 2/3) are combined and then
split evenly to feed two reverse transmitters (XMTR 1 and XMTR 2). Signals from the
right side of the amplifier (Ports 4 and 5/6) are combined and then split evenly to
feed two reverse transmitters (XMTR 3 and XMTR 4).
Install the transmitters that are dedicated to Ports 1 and 2/3 in XMTR 1 and XMTR 2.
Install the transmitters that are dedicated to Ports 4 and 5/6 in XMTR 3 and XMTR 4.
split evenly to feed two reverse transmitters (XMTR 1 and XMTR 2). Signals from the
right side of the amplifier (Ports 4 and 5/6) are combined and then split evenly to
feed two reverse transmitters (XMTR 3 and XMTR 4).
Install the transmitters that are dedicated to Ports 1 and 2/3 in XMTR 1 and XMTR 2.
Install the transmitters that are dedicated to Ports 4 and 5/6 in XMTR 3 and XMTR 4.
The following diagram illustrates reverse path signal flow in this configuration
module.
module.