Руководство По Установке для Cisco Headend System Release 2.7
Chapter 3 Setting Up Hubs, MPEG Sources, MQAM Modulators, PCGs, and SCSs
28
4017650 Rev C
Configuration Three: Distributed DNCS Enabled and Network Binding Disabled
Creating New Hubs
1 From the DNCS Administrative Console, click the DNCS tab, and then click the
1 From the DNCS Administrative Console, click the DNCS tab, and then click the
Network Element Provisioning tab.
2 Click Hub. The Hub Summary window opens.
3 Click Add Hub. An empty row is added to the user interface.
4 Enter the correct Hub Name and Network ID in the blank fields.
5 Select the headend for this hub.
6 Click Save. The system saves the hub information in the DNCS database and
5 Select the headend for this hub.
6 Click Save. The system saves the hub information in the DNCS database and
updates the Hub Summary window to include the new hub.
Note: The entries are sorted based on the Network ID.
Note: The entries are sorted based on the Network ID.
Modifying a Hub
1 From the DNCS Administrative Console, click the DNCS tab, and then click the
1 From the DNCS Administrative Console, click the DNCS tab, and then click the
Network Element Provisioning tab.
2 Click Hub. The Hub List window opens.
3 Click the Select button on the row containing the hub you want to modify.
4 Click File and choose Open. The Set Up Hub window opens for the hub you
3 Click the Select button on the row containing the hub you want to modify.
4 Click File and choose Open. The Set Up Hub window opens for the hub you
selected.
5 To change the name of this hub, click in the Hub Name field and change the
name as desired. You can use up to 15 alphanumeric characters.