Руководство По Установке для Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split
OL-29941-01
3
Before You Begin
Before You Begin
Before you start the upgrade procedure, make sure that you have all of the
components, tools, and equipment ready.
components, tools, and equipment ready.
Components Required to Make the Split Change
Note: Part numbers differ depending on the desired final split. Upgrade kit part
number GS7K-SPLTKT-85105= supports changing a GS7000 launch amplifier to an
85/105 MHz split. Each upgrade kit supports changing the frequency split of ten
GS7000 launch amplifiers.
Each GS7000 split upgrade kit includes the following parts:
number GS7K-SPLTKT-85105= supports changing a GS7000 launch amplifier to an
85/105 MHz split. Each upgrade kit supports changing the frequency split of ten
GS7000 launch amplifiers.
Each GS7000 split upgrade kit includes the following parts:
(10) Reverse Amplifier Board
(20) Non-mirrored Diplex Filters
(20) Mirrored Diplex Filters
Tools and Equipment Required to Make the Split Change
AC power source
1/2-inch socket driver
Torx T-10 screwdriver
Torx T-15 screwdriver
Flat-head screwdriver
Non-conductive tuning tool
Torque wrench with 1/2-inch socket
Test GS7000 Node housing and network analyzer or stealth meter
Small cross head screwdriver
Cable adapter, part number GS7K-SPLKT-CBL