Руководство По Установке для Cisco Headend Digital Broadband Delivery System
Configure the System
78-4036705-01 Rev D
85
Field
Description
Simple Content Protection (SCP)
SCP Enabled
Enabled (checked) indicates that the system uses SCP.
Disabled (unchecked) indicates that the system does not use
SCP.
SCP.
Note: This field cannot be edited in the DTACS. This field is set at
installation.
installation.
DNCS Package
The DNCS package that uses SCP.
DTA Messaging Protocol
Protocol
The type of messaging protocol the system uses. The two valid
options are:
options are:
USP
Proprietary
Note: This field cannot be edited in the DTACS. This field is set at
installation.
installation.
Note: This screen also displays the last time the DTACS synced its database with the
DNCS.
DNCS.
3 Click Save to save your changes, or click Cancel if you want to leave this screen
without saving changes.
Sync the Database
Important: Whenever you make changes to the channel map on the DNCS, you
should wait until the SAM_UPDATE_TIME has been executed before you sync the
database. This will allow for the normal DNCS operation to complete.
1 From the Edit DTACS System Config window, click Sync DB to synchronize
should wait until the SAM_UPDATE_TIME has been executed before you sync the
database. This will allow for the normal DNCS operation to complete.
1 From the Edit DTACS System Config window, click Sync DB to synchronize
data in the DNCS database with data in the DTACS database. The DTA Control
System Configuration window appears, and the message The DB Sync request
processed successfully appears in the lower-left corner of the window.
System Configuration window appears, and the message The DB Sync request
processed successfully appears in the lower-left corner of the window.
2 Click Back to Console to return to the DTACS main page.
Note: You can also click the DTACS text at the top of the window to return to the
DTACS main page on any system configuration page.
DTACS main page on any system configuration page.