Руководство По Установке для Cisco Headend System Release 2.5
Chapter 2 Installing the Alarm Manager Software
60
78-745262-01Rev C
15 Choose one of the following options:
If your Alarm Manager client PC is on the same subnet as the Alarm
Manager server, go to Starting the Alarm Manager Client Software (on page
65).
If your Alarm Manager client PC is not on the same subnet as the Alarm
Manager server and you want to access the Alarm Manager server by server
name, follow these instructions.
a Open the C:\WINNT\system32\drivers\etc\hosts file in the Windows
a Open the C:\WINNT\system32\drivers\etc\hosts file in the Windows
Wordpad utility.
b Locate the following line:
127. 0. 0. 1
localhost
c Beneath the line you located in step b), insert the following line:
###.###.###.### emshost
Notes:
Notes:
Substitute the IP address of the Alarm Manager server for
###.###.###.###.
Substitute the hostname of the Alarm Manager server for emshost.
d Save and close the \hosts file.
e Go to
Starting the Alarm Manager Client Software (on page 65).
If your Alarm Manager client PC is not on the same subnet as the Alarm
Manager server and you want to access the Alarm Manager server by IP
address, go to Starting the Alarm Manager Client Software (on page 65).
Note: You will configure the Alarm Manager client PC for accessing the
Note: You will configure the Alarm Manager client PC for accessing the
Alarm Manager server by IP address in the following procedure.