Руководство По Установке для Cisco Headend System Release 2.7
Stop System Components
4035749 Rev B
49
3 If applicable, from the dncs window, use the siteCmd command to access the
RNCS and complete the following steps.
a Type the following command and press Enter. The RNCS processes stop.
a Type the following command and press Enter. The RNCS processes stop.
siteCmd [lionn hostname] lionnStop
b Type the following command and press Enter. The initd process on the
LIONN shuts down.
siteCmd [lionn hostname] lionnKill
c Type the following command and press Enter to determine if the processes
have stopped. The processes are stopped when there are no processes listed
in the output.
in the output.
siteCmd [lionn hostname]pgrep -fl dvs
d From the root xterm window, type the following commands, pressing Enter
after each, to disable the RNCS cron jobs.
ssh –X dncs@[lionn hostname]
su -
svcadm –v disable –s cron
exit
4 Close all GUIs and WUIs.
5 From the dncs xterm window on the DNCS, complete these instructions.
5 From the dncs xterm window on the DNCS, complete these instructions.
a Type the following command and press Enter. The DNCS processes stop.
dncsStop
b Type the following command and press Enter. The initd process on the
DNCS is shut down.
dncsKill
c Type the following command and press Enter to determine if the processes
have stopped. The processes are stopped when there are no processes listed
in the output.
in the output.
pgrep -fl dvs
Note: The following entries will always appear in the output of this
command and indicate that it is safe to proceed with the next procedure in
this chapter.
– /usr/sbin/dtrace -qws /dvs/dncs/etc/app_crash/app_crash_global.d
– /dvs/dncs/bin/dncsResMon
command and indicate that it is safe to proceed with the next procedure in
this chapter.
– /usr/sbin/dtrace -qws /dvs/dncs/etc/app_crash/app_crash_global.d
– /dvs/dncs/bin/dncsResMon
d From the root xterm window, type the following command and press Enter
to disable cron jobs.
svcadm –v disable –s cron