Руководство По Установке для Cisco Headend Digital Broadband Delivery System
Chapter 4 Install the ASI Server Software
94
78-4004034-01 Rev C
Configure the ASI Server
Introduction
This section provides steps for configuring the ASI server.
Configuring the ASI Server
Complete these steps to configure the ASI server.
1 At the ISA Configuration Tool menu, type the number that corresponds to
1 At the ISA Configuration Tool menu, type the number that corresponds to
Configure Base Properties and press Enter. The system prompts you to choose
your name service vendor.
2 If you have an ISA configuration, type the number that corresponds to Orbacus
and press Enter.
Important: You must type the corresponding number. Do not simply press Enter
Important: You must type the corresponding number. Do not simply press Enter
to accept the default.
Result: The system prompts you for the name service host.
Result: The system prompts you for the name service host.
3 If you have an ISA configuration, type nameserver and press Enter. The system
prompts you for the name service port.
4 Press Enter to accept the default of 5000. The system asks whether or not ORB
Persistence is enabled.
5 If you have an ISA configuration, press Enter to accept the default of true. The
system prompts the user for the Jacorb connection client timeout value.
6 Press Enter to accept the dafault value of 30000. The ISA Configuration Tool
menu appears.
7 If you have an ISA configuration, type the number that corresponds to
Configure XOD Properties and press Enter. The system prompts you for the
IXOD Database User.
8 Press Enter to accept the default user of ixod. The system prompts you for the
IXOD Database Password.
9 Press Enter to accept the default password of ixod. The system prompts you for
the IXOD Database Host.
10 Press Enter to accept the default of localhost. The system prompts you for the
IXOD Database SID.
11 Press Enter to accept the default of asi. The system prompts you for the session
gateway name.
12 If you have an ISA environment, type the number that corresponds to
N2BB, Factories.Context/N2BBSessionGateway.Factory and press Enter. The
system prompts you for the DCI Port.