Руководство По Установке для Cisco Headend Digital Broadband Delivery System
Configure/Verify the ASI Card
4036631 Rev B
57
Configure/Verify the ASI Card
In this procedure, you will ensure that the ASI card is configured correctly.
1 Type /dvs/dncs/bin/configureASI.pl and then press Enter.
1 Type /dvs/dncs/bin/configureASI.pl and then press Enter.
Result: The script checks for the presence of the ASI card and detects any
problems with how the card is configured. The script displays a message that
says the card is configured correctly, or seeks confirmation to correct any
problems that are found.
problems with how the card is configured. The script displays a message that
says the card is configured correctly, or seeks confirmation to correct any
problems that are found.
2 Did the script uncover any problems with how the ASI card is configured?
If yes, go to step 3.
If no, go to step 8.
3 Type y (if you want the script to correct the problem) and then press Enter. The
system modifies the configuration of the Direct ASI card and prompts you to
reboot the computer.
reboot the computer.
4 Type /usr/sbin/shutdown -g0 -i6 -y and then press Enter to reboot the DNCS.
5 Log in to the DNCS as dncs user.
6 Log on to an xterm window on the DNCS as root user.
7 Repeat steps 1 through 6.
8 Is the ASI card configured correctly?
5 Log in to the DNCS as dncs user.
6 Log on to an xterm window on the DNCS as root user.
7 Repeat steps 1 through 6.
8 Is the ASI card configured correctly?
If yes, follow these instructions.
a Type /usr/sbin/shutdown -g0 -i6 -y and then press Enter to reboot the
a Type /usr/sbin/shutdown -g0 -i6 -y and then press Enter to reboot the
DNCS.
b Log on to the DNCS as dncs user.
If no, call Cisco Services.