Руководство По Установке для Cisco Headend System Release 2.7
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Creating a SAM Service for the New InView Service
4019969 Rev B
55
Creating a SAM Service for the New InView Service
To create a SAM service for the new package (for example, IVDev), complete the
following steps:
1 From the DNCS Administrative Console, click the Application Interface
1 From the DNCS Administrative Console, click the Application Interface
Modules tab and then click SAM Service. The SAM Service List window opens.
2 Click File and select New. The Set Up SAM Service window opens.
3 Enter values in the following fields:
3 Enter values in the following fields:
Service Name: The service name can be the same as the name used for the
short description. Read about the Short Description field before completing
this field.
Short Description: This field identifies how the service is to be launched.
Type one of the following descriptions in the Short Description field to
indicate how you want subscribers to launch the InView main menu for the
new InView service:
–
–
_KEYA: launches the InView main menu when the A key on the remote
control is pressed.
–
_KEYB: launches the InView main menu when the B key on the remote
control is pressed.
Note: The _KEYA and _KEYB are reserved system words that instruct
Note: The _KEYA and _KEYB are reserved system words that instruct
SARA to activate the application when the subscriber presses the A or B
key on the remote control.
–
The short description can be anything (for example InVue) if InView
services are to be accessible from the Services Portal.
–
The short description can be anything (for example INVOD) if an InView
service is to be accessible from a specific channel.
4 In the Long Description field, type a string description of the service being
offered (for example, InView development service).
Note: This description is used in the startup screens when the service is
Note: This description is used in the startup screens when the service is
launched.
5 From the Logo field, type 0 to indicate that a logo is not needed.