Руководство По Установке для Cisco Headend System Release 2.7
Check the BFS Inband Sources
4022447 Rev B
89
Check the BFS Inband Sources
The BFS inband sources in your RNCS network must use the correct BFS MAC
address in the Session ID MAC Address field to work correctly.
address in the Session ID MAC Address field to work correctly.
Follow these instructions to check your BFS inband sources.
1 On the DNCS Administrative Console, click the Application Interface Modules
tab.
2 Click BFS Admin. The BFS Admin Sites window opens.
3 Select the RNCS you want to check and click File > Select. The Site BFS
3 Select the RNCS you want to check and click File > Select. The Site BFS
Administration window opens.
4 Click the Hosts tab.
5 Select the Host name in the list and click File > Open. The Set Up BFS Host
5 Select the Host name in the list and click File > Open. The Set Up BFS Host
window opens for that host.
6 Click PAT Configuration. The Inband Data PAT opens.
7 Look through the list of inband sources and their listed Session MAC Addresses.
Do they all match the BFS MAC Address you noted in Check the BFS MAC
Address (on page 88)?
Address (on page 88)?
If yes, you are finished with this procedure. Go to Check the RNCS BFSQAM
(on page 90).
(on page 90).
If no, you will need to delete the source and re-create it with the BFS MAC
Address as the Session MAC Address.
Address as the Session MAC Address.