Руководство По Установке для Cisco Headend System Release 2.7
4040195 Rev B
3
Pre-Installation Checks
Pre-Installation Checks
Follow these instructions before installing the Solaris Patch Set.
1 Log into the CDE login screens as dncs user.
2 Type xterm -sb -sl 10000 -sk -si -T ROOT -bg red -fg yellow
1 Log into the CDE login screens as dncs user.
2 Type xterm -sb -sl 10000 -sk -si -T ROOT -bg red -fg yellow
-e su - &
and press Enter. A new root window appears and prompts you for
the root password.
3 Type the root password and press Enter. You are now logged into the DNCS as
root user.
4 Type ./dvs/dncs/bin/dncsSetup and press Enter.
5 Type metastat | more and press Enter. The system displays the status of all
5 Type metastat | more and press Enter. The system displays the status of all
the metadevices on the DNCS.
Note: If necessary, press the spacebar to page through the entire output.
6 Does the designation Okay appear in the State column next to each metadevice?
If yes, go to the next step.
If no, contact Cisco Services for assistance in resolving this issue.
7 If your system is an E450, do all Hot Spares indicate that they are Available?
If yes, go to the next step.
If no, contact Cisco Services for assistance in resolving this issue.
8 Verify that the /etc/vfstab file contains the correct mount information. Type
cat /etc/vfstab
and press Enter. You should see a response similar to the
following.
Note: The output should show devices to be mounted as /dev/md/dsk/d5xx
devices. If it shows devices such as c1t0d0s# or c2t8d0s#, the file contains the
incorrect mounting information. Contact Cisco Services for assistance.
devices. If it shows devices such as c1t0d0s# or c2t8d0s#, the file contains the
incorrect mounting information. Contact Cisco Services for assistance.