Примечания к выпуску для Cisco Model D-PCG1000 PowerKEY CAS Gateway
QAM Modulator Software Version
2.5.8 Release Note
2.5.8 Release Note
Overview
Introduction
This document describes the change requests (CRs) implemented by upgrading a
Model D9477 Quadrature Amplitude Modulation (QAM) Modulator to QAM
software version 2.5.8.
Model D9477 Quadrature Amplitude Modulation (QAM) Modulator to QAM
software version 2.5.8.
Audience
This document is intended for system operators or field service engineers who are
responsible for installing the QAM software onto the QAM.
responsible for installing the QAM software onto the QAM.
Scope
This release note provides an executive overview of QAM software version 2.5.8.
If you have questions about this software release or require more detailed
information, call Cisco
If you have questions about this software release or require more detailed
information, call Cisco
®
Services at 1-866-787-3866.
Document Version
This is the third formal release of this document. This document has been revised
to provide only release note information. Instructions for installing QAM software
version 2.5.8 on a QAM Modulator can now be found in QAM Software Installation
Instructions (part number 4026030).
to provide only release note information. Instructions for installing QAM software
version 2.5.8 on a QAM Modulator can now be found in QAM Software Installation
Instructions (part number 4026030).