Технические ссылки для Cisco Headend System Release 2.7
4015090 Rev B
3
Obtain and Install the Security Software Patch
Obtain and Install the Security Software Patch
The procedures in this section provide general instructions to obtain, extract, and
install the Security Software Patch.
install the Security Software Patch.
Obtaining the Security Software Patch
The following procedure provides generic steps to directly download software from
the FTP server onto the DNCS. Because many sites do not allow an open Internet
connection to the DNCS for security reasons, this procedure provides generic
instructions to access the FTP server and download the software onto the DNCS.
the FTP server onto the DNCS. Because many sites do not allow an open Internet
connection to the DNCS for security reasons, this procedure provides generic
instructions to access the FTP server and download the software onto the DNCS.
Follow these general instructions to obtain the compressed file that contains the
Security Software Patch.
1 On the DNCS, create a directory called download in the /export/home/dncs
Security Software Patch.
1 On the DNCS, create a directory called download in the /export/home/dncs
directory structure (mkdir /export/home/dncs/download).
2 Log on to the Cisco FTP server.
Notes:
The address of the server is ftp.sciatl.com or 192.133.243.133.
Note: The address for the Cisco FTP server is subject to change. If you are
unable to reach the FTP server, please contact Cisco Services for the latest
address.
Note: The address for the Cisco FTP server is subject to change. If you are
unable to reach the FTP server, please contact Cisco Services for the latest
address.
The username is anonymous.
The password is the email address of the person logging in.
3 Choose one of the following options to navigate to the directory in which the file
is located:
If you are outside of Cisco's firewall, type
cd /pub/scicare/RELEASED/SR4.2EmergencyPatches
cd /pub/scicare/RELEASED/SR4.2EmergencyPatches
If you are inside of Cisco's firewall, type
cd /external_pub/scicare/RELEASED/SR4.2EmergencyPatches
cd /external_pub/scicare/RELEASED/SR4.2EmergencyPatches
4 Type bin and press Enter. The system sets the ftp transfer mode to binary.
5 Type hash and press Enter. The system configures itself to display hash marks
5 Type hash and press Enter. The system configures itself to display hash marks
that show file-transfer progress.
6 Type prompt and press Enter. The system indicates that interactive mode is off.
7 Type get 4.2.0.5p1_SolarisPatch.tar.gz and then press Enter. The system begins
7 Type get 4.2.0.5p1_SolarisPatch.tar.gz and then press Enter. The system begins
copying the file from the FTP server to the current directory on the DNCS.
8 Type bye and press Enter to log out of the Cisco FTP server.