Руководство По Установке для Cisco Model 6109 6 MHz Off-Air Reference (NTSC)
Chapter 3 USRM Web Interface
220
4039132 Rev B
Parameter
Description
RedundancyMode
Sets/displays the redundancy mode as follows:
Legacy/ASIEnabled - This mode emulates the original
GQAM functionality with a single GbE port and enabled
ASI ports.
GQAM functionality with a single GbE port and enabled
ASI ports.
DualWithVIP - This mode enables both GbE ports using
a virtual IP address. A single GbE port is active. If the
active port fails, the alternate GbE port is enabled. The
active GbE port is bound to the virtual IP address. The
effect is that the IP address is constant independent of
which port is enabled.
a virtual IP address. A single GbE port is active. If the
active port fails, the alternate GbE port is enabled. The
active GbE port is bound to the virtual IP address. The
effect is that the IP address is constant independent of
which port is enabled.
DualWithoutVIP - This mode enables both GbE ports. A
virtual IP address is not configured. Each GbE port has
its own IP address.
virtual IP address is not configured. Each GbE port has
its own IP address.
DataIpAddress2
Sets/displays the IP address of the second data port of
the QAM chassis.
the QAM chassis.
VirtualIPAddr
Sets/displays a virtual address for the dual GigE ports.
ActiveGigEPort
Reports which GigE port is active.
ActiveIPAddress
Reports the active IP address.
GbeSubnetMask
The subnet mask for the GbE port.