Руководство По Установке для Cisco Model 6109 6 MHz Off-Air Reference (NTSC)
USRM Web Interface - Platform Components
78-4021139-01 Rev D
103
HaStandby - Configuration Page
The HaStandby - Configuration page allows configuration of the standby server's
operation.
Refer to HaPrimary - Network Config Page for an explanation of the high-
Refer to HaPrimary - Network Config Page for an explanation of the high-
availability function.
The following illustration shows the HaStandby - Configuration page.
The following illustration shows the HaStandby - Configuration page.
Parameters
The following table explains the HaStandby - Configuration page parameters.
The following table explains the HaStandby - Configuration page parameters.
Parameter
Description
CommFailThreshold
This setting configures the alarm detection mechanism.
The servers send heartbeat messages when connected. If
a data message has not been transmitted for a configured
time period, a heartbeat message is transmitted to
indicate normal operation. The CommFailThreshold
parameter configures the number of consecutive missed
messages before asserting a primary server failure.
CommTimeout
Configures the minimum time between messages.
Normally, messages are transmitted regularly because of
normal operation. Every change-of-state on a primary
causes a message to be transmitted to a standby server.
This setting configures the minimum time between
message transmissions. If a message has not been
transmitted for this time period, a heartbeat message is
generated.
Note: You must be service level to modify this
Note: You must be service level to modify this
parameter.