Руководство По Установке для Cisco Model 6109 6 MHz Off-Air Reference (NTSC)
Chapter 3 USRM Web Interface
222
78-4021139-01 Rev D
Parameters
The following table explains the SdvSm - Active Progs Base page parameters.
The following table explains the SdvSm - Active Progs Base page parameters.
Parameter
Description
SgIndex.Program
The service group and program index for the entry.
SourceId
The identifier of a switched program. When the client
requests a program using the CCMIS protocol, the
request uses this identifier to indicate the requested
program. If the requested sourceId is not in the table, the
request is considered to be a request for a non-switched
program and the request is merely logged with no
further action.
Status
The status of the switched program. When a program is
activated on a QAM device, the status is set as Activate.
QAM devices that use the GQI protocol, do not provide
an indication of stream delivery success. For these
devices, that status indicates Activate. For QAM devices
that use the R6 protocol, the QAM device provides an
indication of the stream delivery. The states Source1,
Source2, and Source3 indicate that the respective source
is received and is output to the QAM channel. The states
NetworkFail, MulticastFail, and InputPortFail are alarm
states that indicate that the input stream is not received.
StartTime
The date and time that the stream was initially activated.
Program
Indicates the name of the switched program. The
program name is configured in the Offered Programs
table.
ServiceGroup
The identifier for the service group. When a client
registers with the server or requests a switched program,
the client provides the service group identifier as part of
the request. The server organizes STBs by service group.
The maximum number of STBs in a service group is
defined by the ServiceGroupSTBCapacity parameter on
the Configuration page.
NumUsers
A status parameter that defines the number of tuners
using this program in the service group. This parameter
is virtual. Upon request for this parameter, the
application scans the STB Tuner-State table for the
service group and sums the number of streams using this
source-Id.
Tsid
The transport stream identifier.
Frequency
The frequency of the QAM channel containing the
program.
ProgramNumber
The MPEG program number associated to this program.