Руководство По Установке для Cisco Model 6109 6 MHz Off-Air Reference (NTSC)
Chapter 3 USRM Web Interface
228
78-4021139-01 Rev D
Parameters
The following table explains the SdvSm - Configuration page parameters.
The following table explains the SdvSm - Configuration page parameters.
Parameter
Description
ProgramHoldTime
Defines the minimum amount of time a program will be
active after the last user has left the program.
AdminState
The admin state, as follows:
InService - normal mode of operation.
OutOfService - idle mode, no processing of requests.
Release - release all sessions and then transition to the
InService - normal mode of operation.
OutOfService - idle mode, no processing of requests.
Release - release all sessions and then transition to the
OutOfService state.
TotalSTBCapacity
The maximum number of active STBs supported by the
software. This value is determined by the license file
installed.
STBTunerCapacity
The maximum number of tuners per STB supported by
the software.
Value: 9
Value: 9
MaxPrograms
The maximum number of programs that can be entered
into the Offered Programs table; the maximum number
of switched digital services supported.
MaxServiceGroup
The maximum number of service groups supported by
the software.
Value: 300
Value: 300
MaxChansPerServiceGroup
The maximum number of TSIDs or channels supported
by this USRM on a per-service-group basis.
ForceTuneSourceId
The source-ID issued to the set-top tuner when the
program or service group is (1) terminated or (2) the
bandwidth used by the program is recaptured.
StbCapacityAlarmTheshold
The alarm threshold in per-cent for STB capacity alarms.
An alarm is generated when the number of active STBs is
greater than the threshold. This parameter applies to
both the total number of STBs and the number of STBs in
a service group.
RecaptureThreshold
Configures the threshold that causes the bandwidth
recapture procedure to be invoked. When the demand-
available bandwidth in the service group is less than this
value, then the bandwidth recapture procedures are
activated. Demand-available bandwidth is bandwidth
that can be used immediately to satisfy a user request.
ServiceGroupSTBCapacity
The maximum number of STBs in a single service group
supported by the software.
Value: 8000
Value: 8000