Руководство По Установке для Cisco Model 6109 6 MHz Off-Air Reference (NTSC)
Chapter 4 Operation
330
78-4021139-01 Rev D
RFGW-1 QAM Setup Using RFGW-1 Model
Perform the following steps to set up an RFGW-1 QAM using an RFGW1 model.
1 Expand the ResourceManager - QAMs branch in the USRM web interface, and
1 Expand the ResourceManager - QAMs branch in the USRM web interface, and
then select the QAM <QamName> - Chassis page.
Note: In this example, the QAM is named QAM RFGW_416.
Note: In this example, the QAM is named QAM RFGW_416.
2 Enter the CtrlIPAddress, Protection, AdminState, and DeviceName, and then
click Commit Changes.
Note: DeviceName is not settable in version 1.6.0.
Note: DeviceName is not settable in version 1.6.0.
3 Select the ResourceManager - QAMs - QAM <QamName> - Output Ports page.
Note: This example shows a 48-channel RFGW-1. The display for a 96-channel
RFGW-1 is very similar.