Руководство По Установке для Cisco Model 6109 6 MHz Off-Air Reference (NTSC)
Creating QAMs on the USRM
78-4021139-01 Rev D
339
Removing a QAM Chassis From the USRM
Perform the following steps to remove a QAM chassis from the USRM.
1 Select the Resource Manager - QAMs - QAM <QamName> - Output Ports page,
1 Select the Resource Manager - QAMs - QAM <QamName> - Output Ports page,
where QamName is the name of the QAM to be removed.
2 Set the AdminState to Release and click Commit Changes.
Result: This releases all sessions on all output ports of the QAM.
3 Set the AdminState to Delete and click Commit Changes.
Result: This removes the QAM from the USRM database.
4 Refresh the navigation tree and verify that the QAM is gone.
Note: In a DNCS 4.2.0 system, once a GQAM is removed from a USRM, you should
Note: In a DNCS 4.2.0 system, once a GQAM is removed from a USRM, you should
update the DNCS Service Group page(s) by removing the GQAM TSIDs from the
Selected Ports window and placing them back into the Available Ports window. For
a system running DNCS release 4.2.1 or greater, this is also applicable to any third
party QAMs that are being used or shared by the DNCS and USRM.