Руководство По Проектированию для Cisco DNCS System Release 2.7 3.7 4.2
4-2
Configuring Mixed DOCSIS/DAVIC on the DNCS
4000358 Rev B
Configure Mixed DOCSIS/DAVIC
Introduction
To configure Mixed DOCSIS/DAVIC on your DNCS, you must change the DHCT
Communication Mode (DCM) of the bridge from DAVIC to Mixed DOCSIS/DAVIC.
After changing the communication mode, you must send a DCM update message to
all of the affected DHCT types and bridges so that the previously booted DHCTs can
operate in the new Mixed DOCSIS/DAVIC mode.
This section provides instructions for configuring Mixed DOCSIS/DAVIC in your
This section provides instructions for configuring Mixed DOCSIS/DAVIC in your
DBDS.
Before you Configure Mixed DOCSIS/DAVIC in the DBDS
Before you configure Mixed DOCSIS/DAVIC in your DBDS, you must complete the
following tasks in the order in which they appear to ensure proper operation:
1.
Install System Release 3.0. Refer to System Release 3.0 Unipak Upgrade
Installation Instructions.
2.
Install SARA 1.41 and PowerTV Home Gateway Edition 1.0. Refer to SARA
1.41 and PowerTV Home Gateway Edition 1.0 Installation Instructions.
3.
Obtain a list of all the bridges that cover the targeted DHCTs from the site
administrator. This list contains the QPSKs and CMTSs that need to have their
DCMs set to Mixed DOCSIS/DAVIC.