Руководство По Установке для Cisco DNCS System Release 2.7 3.7 4.2
Chapter 1 Installation Process Overview
12
78-4003052-01 Rev G
What Are Your Installation Tasks?
Phase One: Complete Pre-Upgrade Checks
When? You can complete this phase during normal business hours.
1 Verify that the system is operating correctly.
2 Run the updateOUI utility.
3 Run the listOSM and/or the listCVT utilities to complete the following tasks:
When? You can complete this phase during normal business hours.
1 Verify that the system is operating correctly.
2 Run the updateOUI utility.
3 Run the listOSM and/or the listCVT utilities to complete the following tasks:
Delete unused DHCT types
Remove unused files from BFS
4 Install the following onto the DNCS:
Application Platform Release software
New version of OSCheck Table (if necessary)
New version of DHCT Resource file (settop.xxx, if necessary)
5 Correct any issues identified during Phase One.
Phase Two: Test New Software
When? You can complete this phase during normal business hours.
OSM Downloads
1 Remove and unassociate software from
When? You can complete this phase during normal business hours.
OSM Downloads
1 Remove and unassociate software from
the DHCTs being upgraded.
Note: You cannot stage DHCTs that are
Note: You cannot stage DHCTs that are
downloading new software once this is
done.
2 Add the new files to the OS list.
3 Download software to the test DHCTs.
4 Verify that the test DHCTs operate
3 Download software to the test DHCTs.
4 Verify that the test DHCTs operate
correctly.
CVT Downloads
1 Create or modify the CVT test groups.
2 Load the new CVT image files onto
1 Create or modify the CVT test groups.
2 Load the new CVT image files onto
the image list.
3 Download the software to the CVT
test groups.
4 Verify that the test devices operate
correctly.