Руководство По Установке для Cisco DNCS System Release 2.7 3.7 4.2

Скачать
Страница из 152
 
Chapter 2    Phase One - Perform Pre-Upgrade Checks 
 
 
 
24 
78-4003052-01 Rev G 
Run listCVT Utility 
The listCVT utility determines which DHCT models are currently using the CVT 
download method and reports unused files on the image list. 
 
Running listCVT Utility 
1  Are you using the CVT download method for any devices in your network? 
 
If yes or you are unsure, go to step 2. 
 
If no, go to Clean Up the ResApp Directory (Optional) (on page 26) 
2  Open an xterm window on the DNCS. 
3  Type listCVT -v and press Enter. This command provides the version of listCVT 
utility that is currently on your network. 
4  Compare the version number of the listCVT utility on your DNCS with the 
version number listed in the ROM to Model Matrix (on page 107). 
 
If the version number is equal to or greater than the one listed in the matrix, 
go to step 5. 
 
If the version number is less than the one listed in the matrix, contact Cisco 
Services to receive the latest utility. 
5  Type cd /export/home/dncs/doctor and press Enter. The current directory is now 
the doctor directory. 
Note: Type a space between cd and /
6  Type listCVT > precvt and press Enter
7  Type more precvt and press Enter. This command enables you to view the file 
and verify the current download configuration for each DHCT type that is active 
in the network. 
8  Does the report indicate that there are unused files? 
 
If yes, go to step 9. 
 
If no, go to step 14. 
9  On the DNCS Administrative Console, select the DNCS tab and then select the 
following tab based on the system release you have installed: 
 
For SR 2.2/3.2/4.0 and earlier, select the Element Provisioning tab. 
 
For SR 2.5/3.5/4.2 and later, select the Home Element Provisioning tab. 
10  Click Image. The Image List window opens. 
11  Click the Downloadable Files tab. 
12  Highlight a software file that is unused in the network. Click File and select 
Delete
Note: The DHCT software files have file extensions of .rom