Руководство По Установке для Cisco DNCS System Release 2.7 3.7 4.2
Chapter 3 Phase Two - Test New Software
40
78-4003052-01 Rev G
Overview
After you confirm that your system is healthy and you have downloaded software
onto the DNCS, you must test the download process with your test devices. To do
this, you must load the software onto the BFS carousel and send a directed
download to the test devices.
Before You Begin
Before you begin Phase Two, you must complete Phase One - Perform Pre-Upgrade
When Do You Begin Phase Two?
Begin Phase Two of the installation process on the day before the scheduled
installation date. This phase takes from 10 to 20 minutes for each device you are
testing.
You can complete Phase Two during regular business hours.
Important! After you begin Phase Two, you will not be able to stage DHCTs that
You can complete Phase Two during regular business hours.
Important! After you begin Phase Two, you will not be able to stage DHCTs that
will be upgraded using the OSM download method until you have finished
installing the client application platform software in Phase Three.
What Do You Need?
Refer to What Do You Need? (on page 3) for the list of items you need.
In addition, this chapter refers to many procedures that are contained in the
In addition, this chapter refers to many procedures that are contained in the
publications listed in Related Publications (on page vii). Therefore, you may also
want to gather those publications before you begin.
The test procedures in this chapter assume that you are testing one DHCT hardware
The test procedures in this chapter assume that you are testing one DHCT hardware
revision for every set of files.
You will need a secure GUI password. Use one of the following options to obtain the
You will need a secure GUI password. Use one of the following options to obtain the
password:
If you are a site that supports subscribers, then you can obtain a secure GUI
password from Cisco Services. This provides Cisco Services with the opportunity
to communicate known issues about the software as well as other information
that may be needed before loading the software onto your network.
If you are a software developer, Cisco Services can disable the secure GUI for
you. Contact Cisco Services for more information on disabling the secure GUI.