Руководство По Установке для Cisco DNCS System Release 2.7 3.7 4.2
Chapter 2 Phase One - Perform Pre-Upgrade Checks
20
Error! No text of specified style in document.
Run updateOUI Utility
If you have previously run the updateOUI utility on your network, then you can
skip this section and go to Delete Unused DHCT Types (on page 21). If you have not
previously run this utility on the network, then you need to complete this procedure
before going to Delete Unused DHCT Types. If you are not sure if you have run the
updateOUI utility already, you can run it and record the results.
Note: The OUI refers to the first three octets of a MAC address (for example,
Note: The OUI refers to the first three octets of a MAC address (for example,
00:02:DE). Refer to
Add the updateOUI Utility to the Chrontab File (on page Error!
Bookmark not defined.) for information about scheduling this utility.
Running updateOUI Utility
1 Open an xterm window on the DNCS.
2 Type updateOUI -r and press Enter. Any null entries in the database are set to
2 Type updateOUI -r and press Enter. Any null entries in the database are set to
the original OUI for each Cisco DHCT.
3 Type updateOUI and press Enter. All DHCTs with a Cisco OUI are set with
00:02:DE as their OUI.
4 Go to
Delete Unused DHCT Types (on page 21).